Our Member Companies

Manitoba Aerospace represents a broad membership from SMBs to OEMs.

Our aerospace and defence industries are world leaders in numerous areas including: composites research, design and fabrication; gas turbine engine repair and overhaul; aircraft engine testing and certification; and space craft systems and support.

Along with these global leaders, Manitoba has a network of SMBs that compete and supply into world markets on six (6) continents.

A Adams Supply Ltd

Advanced Composite Structures

Advanced Composite Structures is a world leader in Rotor Blade and Composite Structure repair technologies for fixed-wing and rotary-wing aircraft. They provide helicopter rotor blade and composite structure repairs for Bell, Eurocopter, MD Helicopters, Schweizer and Sikorsky helicopter models.

Advanced Composites Structures also provides fixed-wing aircraft composite repairs for Airbus, Boeing, Bombardier, Cessna, DeHavelland, Pilatus, Fokker and many other aircraft models.


Aero Recip

Founded in 1998, Aero Recip is the largest piston engine overhaul shop in Canada. Their experienced technicians and industry specialists have consistently delivered quality, service and respect.

Located in the centre of North America, with 31,800 square feet and the largest core-pool in the country, quick turnaround is the standard.

Aero Recip Canada is a Gregorash Aviation company, an association that assures every Aero Recip customer efficient access to a wide range of aviation products and services.


Argus Industries

Argus’ Aerospace Division has the ability to respond instantly to any of your urgent Aerospace requirements. Whether it is an AOG or just a scheduled molded or fabricated product, Argus will deliver on time, every time.

Argus warehouses a variety of specialty high grade materials that allow them to respond instantly to meet your needs. Argus has been a tier 1 supplier in aerospace for over 15 years and demonstrates the ability to deliver a consistently superior product. Their wealth of long term employees, strong tribal culture, and LEAN principals, enable them to provide solid product knowledge and service to ensure the highest quality of manufactured seals, gaskets and elastomeric products.


Boeing Winnipeg

Boeing Canada Winnipeg is the largest Canadian Boeing site and the largest aerospace composite manufacturer in the country. The site produces nearly 1,000 end item composite parts and assemblies for Boeing Commercial Airplanes, specifically for the 737, 747, 767, 777 and 787 airplane models.



Cadorath is a multi-faceted international company with several divisions, products and services. With over 55 years of experience, Cadorath provides products and services to the aviation, industrial, agricultural and consumer goods sectors and have remained committed to quality, reliability and customer satisfaction.


Canadian Propeller

Established in 1991 by licensed, experienced propeller technicians; Canadian Propeller has been meeting the needs of our customers for over 20 years.

Canadian Propeller specializes in aircraft propeller & governor maintenance and servicing of all types of aircraft from Cessna 150’s to Beech 1900’s and Dash 8’s. We also provide propeller fleet consulting, management and valuations. Specific industry propeller training is also available to suit your particular needs.


Cormer Aerospace

From its modest beginnings in 1988, Cormer Aerospace has grown to become an exceptional provider of responsive, customer focused production, assembly, and post-production processes. Cormer Aerospace is built on quality, close customer relationships, and other unique culture and values. With talented people using state-of-the-art equipment, Cormer Aerospace continues to provide efficient and effective results for some of the world’s best aerospace industry customers.



Deloitte, one of Canada’s leading professional services firms, is the brand under which tens of thousands of dedicated professionals in independent firms throughout the world collaborate to provide audit, tax, financial advisory and consulting services.

Deloitte’s Winnipeg office is one of the largest public accounting and management consulting firms in Manitoba.


Dynamic Machine Corporation

Dynamic Machine Corporation of Winnipeg is a modern industrial manufacturing, repair, and supply company with a fully-equipped machine shop capable of dealing with projects of any size.

Since 1970 Dynamic Machine has been serving national and international clients both by building and repairing all types of custom and general production machinery and by selling, servicing, and repairing all brands of hydraulic and pneumatic equipment.


Economic Development Winnipeg Inc. (EDW)

Economic Development Winnipeg Inc. (EDW) is focused on being a leader in promoting Winnipeg as the ideal place to live, work, invest, and visit through economic development and tourism-related initiatives. EDW embraces a truly collaborative approach in the organization’s day-to-day activities, aimed at minimizing fragmentation and garnering the collective wisdom in stakeholder synergies to produce positive results.



Specializing in custom metal alloy fabrication, Enduron produces superior quality finished products which are designed to meet and exceed their customers’ expectations. Enduron’s sophisticated system of product design, inventory control, project scheduling, inspection procedures, customer service, and documentation help ensure the company’s position as a preferred supplier and manufacturer.



EnviroTREC is a non-profit organization that is partnered with GLACIER, a limited partnership between Rolls-Royce and Pratt & Whitney.

The EnviroTREC assets include all of the test systems and the thrust stand which are located at the GLACIER Facility in Thompson, Manitoba.  This facility is the most modern engine icing certification facility in the world. It is capable of testing engines whose fan diameter is up to 140 inches while producing up to 150,000 pounds of thrust.


Fast Air Executive Aviation Services

Fast Air Executive Aviation is a premier provider of industry leading aviation services.  Based at the Richardson Winnipeg International Airport, they offer executive turboprop and jet charter, air ambulance, aircraft management, and helicopter services out of their private business class terminal.

Fast Air is a certified AMO, authorized for maintenance on a wide range of aircraft, including Bell 206 series helicopters. Fast Air holds instrument, avionics, structures, and component ratings and offers a variety of avionics capabilities in their Transport Canada approved avionics shop.  Fast Air is an authorized dealer for Garmin Flight Deck and Avionics products.


GE Aviation Canada

GE Aviation Canada operates the Research Testing and Development Centre in Winnipeg and a manufacturing plant in Bromont, Quebec.

GE Aviation engines power over 80% of the RCAF aircraft and 62% of global commercial airliners and executive jets. GE also supports its products in country by working with well-established Canadian-based repair and overhaul entities, including Standard Aero, Magellan and Vector Aerospace.

GE Canada is recognized for having delivered high quality Industrial and Regional Benefits as well as having significantly exceeded its Canadian contractual obligations.


Keewatin Air

Keewatin Air offers a variety of ground support services, ranging from aircraft maintenance to aircraft hangarage.

The company’s northern bases offer support for visiting aviators and often provide a safe haven in inclement weather. Keewatin Air offers: Transport Canada Approved AMO with experience on Beechcraft King Air and 1900 aircraft, Pilatus PC 12 aircraft and Learjet aircraft; Hangar facilities in Churchill, Rankin Inlet, and Iqaluit; and de-icing, marshalling, and GPU starts in Churchill, Rankin Inlet, and Iqaluit.


KF Aerospace

KF Aerospace, formally Kelowna Flightcraft, is dedicated to providing superior aircraft maintenance services, aircraft leasing and defence training programs.

KF Aerospace Defence Programs provides fleet support, fleet upgrade programs, and full turnkey solutions.  KF Aerospace provides FWSAR & RCAF Pilot Training and has been a  proud supporter of DND programs in Canada for over 25 years.



Magellan Aerospace, Winnipeg has over 85 years of knowledge and experience in the aerospace industry. The main facility is located in Winnipeg, MB, and there are also satellite locations in Rockwood, MB and Ottawa, ON. The company employs about 700 people.

Magellan manufactures complex aeroengine components and advanced aerostructures fabrications, as well as proprietary products; including small satellite buses, propulsion products, and the Wire Strike Protection System (WSPS™) for civil and military helicopters.


MDs AeroTest

Founded in 1985, MDs has steadily risen to a position of global prominence in the provision of turnkey test facilities and test systems for the aviation, industrial, and marine gas turbine engine community . Through its subsidiary, MDs Aerotest, is operating and maintaining the largest and most advanced cold weather test and research facility for gas turbines in the world.



MicroPilot is the leading manufacturer of miniature autopilots for unmanned aerial vehicles (UAV) and micro aerial vehicles (MAV). Weighing 28 grams, the MP2028 is the world’s smallest full functional autopilot. Capabilities include airspeed hold, altitude hold, turn coordination, GPS navigation, plus autonomous operation from launch to recovery.

With a global roster of more than 200 clients in over 44 countries, MicroPilot sells autopilots and autopilot accessories worldwide to academic, military, and private research institutions, as well as to UAV end users and manufacturers.


Neeginan College of Applied Technology/CAHRD

PointMan Canada Ltd.

With extensive experience in strategic planning, market research and competitive analysis,  PointMan develops and assists in the implementation of investment plans or to develop winning capture strategies within existing or new product areas or segments.

PointMan has organized, developed and delivered promotional presentations in formal aerospace and defence user group communities, symposia and workshops in North America, Europe, India and the Far East.


Precision ADM

Precision ADM identifies, develops, and manufactures high value application opportunities in additive manufacturing. Whether on our own, or working with clients, partners, and suppliers, we access the latest and highest quality production additive and subtractive equipment, processes, and expertise.

With a strong focus on metal and polymer parts for medical and aerospace applications, we endeavour to find the part design and manufacturing solution that best meets the material, quantity, quality, and cost characteristics required for that specific application.


Province of Manitoba – Industry Consulting

Industry Consulting Services provides sector knowledge to business in the areas of marketing, technology, business development and management.

Existing infrastructure advantages are used to maximize economic development opportunities and encourage commercialization and adoption of new technologies and strategic alliances to further strengthen and diversify Manitoba’s industrial capabilities.


Province of Manitoba – Industry Services

Partnering with business, industry and labour to enhance workforce skills and knowledge, Industry Services promotes business and industry-related human resource development to create highly skills, knowledgeable and adaptable workforce in Manitoba. This focus recognizes that a high-performance workplace is directly linked to meeting business goals and improving bottom-line results.


Red River College – Stevenson Campus

Manitoba is home to the third largest aerospace sector in Canada – and Red River College, Stevenson Campus is an active partner, training our workforce to participate in all aspects of the aviation and aerospace sector. RRC grads are found throughout industry – overhauling aircraft engines, maintaining aircraft, building components, or in management positions such as Directors of Maintenance and Quality Assurance.


Rockwell Collins (Previously B/E Aerospace)

At B/E Aerospace, we create products that optimize existing designs, create space, and enhance aircraft capabilities by deploying our responsive and integrated engineering, manufacturing and certification expertise.

Our  two offices in Canada focus on design and manufacturing for aircraft conversions and modifications.  From aircraft doors & mission equipment to storage solutions, we understand regional, VIP,  utility and special mission aircraft.



Southport is a not-for-profit property management and development company, located 3 km south of Portage la Prairie, Manitoba, Canada. Its goal is to establish a world-class business centre balanced with lifestyle, wellness, and recreation facilities. Featuring aviation and aerospace training facilities, research and development of new products, light manufacturing, educational institutions, beautiful open spaces, a golf course, and a fitness centre. Southport is also the proud home of 3 Canadian Forces Flight Training School.


Standard Manufacturers Services Limited

Established in 1982, Standard Manufacturers offers their customers a single source solution for all their manufacturing needs. Standard Manufacturers specializes in engineering, design for manufacturability, rapid prototyping & tool and die, aluminum permanent and semi-permanent mould foundry, heat treating services, CNC machining, fabrication, and product supply.



Founded in 1911, StandardAero has become one of the aerospace industry’s largest independent maintenance, repair and overhaul (MRO) providers in the world. StandardAero’s success is the outgrowth of the synergistic merger of businesses with complementary specialties that have exponentially increased their capabilities and generated unprecedented customer commitment and value.



TDS has long been recognized as a centre of excellence in the areas of corporate and commercial law, labour relations, employment law, and civil litigation. The firm has been recognized by LEXPERT® (Canada’s leading source of news and information about the business of law) on numerous occasions as being the leading corporate law firm in Manitoba.


University of Manitoba

As the first university established in western Canada, the University of Manitoba has been at the centre of research in Manitoba for more than a century. From the development of canola and advances in wireless communication, to the prevention of Rh disease of the newborn and breakthrough discoveries concerning the transmission of HIV/AIDS, our researchers have made contributions that have had a global impact.

The Technology Transfer Office is ready to facilitate your connections with the University of Manitoba.


West Canitest R&D Inc. (WestCaRD)

West Canitest R&D Inc., formerly known as WestCaRD, is a not-for-profit corporation that facilitates economic, technical and specialized workforce development and growth opportunities in the environmental testing, research and development sector in Manitoba.   In partnership with GE Canada and StandardAero, WestCaRD undertakes aircraft engine testing as well as research and technology development at unique test facilities located at the Winnipeg James Armstrong Richardson International Airport.


Winnipeg Airports Authority (WAA)

Winnipeg Airports Authority is a community-based, non-share capital corporation that operates, manages, maintains and invests in your community airport, Winnipeg James Armstrong Richardson International Airport. Control of the airport was transferred from the federal government to WAA on January 1, 1997.